EOTech OPMOD is a line of holographic weapon sights manufactured by EOTech but enhanced with OPMOD features. These sights use a holographic reticle projected onto a small glass window, providing a clear and precise aiming point for the user.
The OPMOD line is a special edition of EOTech sights that have been modified with additional features and enhancements, such as night vision compatibility and improved durability. They are commonly used by the military, law enforcement, and civilian shooters.
Best EOTech OPMOD Sights
1) EOTech OPMOD EXPS2 Holographic Reflex Red Dot Sight
The EOTech OPMOD EXPS2 Holographic Reflex Red Dot Sight is a type of non-magnifying optical sight that projects a red dot reticle onto a glass window. The sight is designed to be mounted on a firearm, such as a rifle or shotgun, and used for quick target acquisition.
The sight is powered by a single 123 lithium battery and has a long battery life. It is made of high-strength aluminum alloy that is shockproof, waterproof, and fog-proof. The reticle has a red dot that is adjustable for brightness and is easy to see in most lighting conditions.
The OPMOD sight also features a quick-detach lever that allows for easy mounting and dismounting from the firearm. It also comes with a side-button interface for easy operation and has a 30-yard zeroing range.
This red dot sight is compatible with night vision devices and has a shortened base that only requires at most 2 3/4 inches of rail space, compared to the 4-inch N battery sights.
Specifications
- Magnification: 1x
- Eye Relief: Unlimited
- Length/Width/Height: 3.5″x2.2″x2.4″ (91.4X 55.8×71.8mm)
- Weight: 11.2 oz. (317grams)
- Waterproof: Submersible to 33 ft. depth
- Mount: 1″ Weaver or (MIL-STD-1913)
- Field of View (100 yds.): 30 yds. (28m) at a 4″ eye relief
- Battery Life: 1000 hours
Pros
- It uses a single transverse CR123 battery to reduce sight length
- The short base only requires smaller space compared to the 4-inch N battery sights
- It has a simple O-ring and tethered cap that achieves a better watertight seal
- Long battery life
- It offers two reticle options
- It has side buttons with a single quick detach throw lever for rail attachment
- Waterproof and submersible to 33 fee
- Supported by OPMOD limited lifetime warranty
Cons
- Requires some expertise to operate
2) EOTech OPMOD EXPS3-0 HHS-I 1 MOA Circle Dot Reticle Holosight Sight
The EOTech OPMOD EXPS3-0 HHS-I is a type of holographic weapon sight that is designed for use on firearms. It features a 1 MOA circle dot reticle, which is a small circle with a dot in the center. The sight offers 30 brightness settings thus allowing you to customize your reticle to fit your lighting conditions.
It is also night vision-compatible with Gen 1-3+ devices, allowing you to take on dark environments with high precision.
This OPMOD EXPS3-0 sight uses holographic technology to project the reticle onto the target, providing a clear and precise aiming point. It is also equipped with a quick-detach base and can be easily mounted and dismounted from the firearm.
Apart from being built to be rugged and durable to withstand recoil, this sight also has an integrated backup iron sight that can be flipped up to use in case of battery failure. It offers a high-quality optic and magnifier to engage distant targets all for an incredible value.
Specifications
- Magnification: 1 x
- Eye Relief: Unlimited
- Length: 8 inches
- Width: 1 inch
- Height: 5 inches
- Weight: 9 oz.
- Reticle: 68 MOA Circle w/ 1-MOA Dot
- Battery Life: 600 continuous hours at nominal setting 12 at room temp
Pros
- It uses a single transverse 123 battery to reduce sight length
- It is compatible with Gen I-III+ Night Vision Systems
- The shortened base only requires at most 2 3/4 inches of rail space
- It is O-ring sealed for waterproofing
- Long battery life
- It has side buttons and is NV compatible with a single quick detach throw lever
Cons
- Quite expensive
3) EOTech OPMOD EXPS3-0 HHS-II 1 MOA Circle Dot Reticle Holosight Sight
The OPMOD EXPS3-0 HHS-II 1 MOA Circle Dot Reticle Holosight Sight is engineered to provide the best performance in close-quarters combat scenarios, with a flip-to-side magnifier mount that allows you to very easily engage short-range targets or medium-range targets.
The OPMOD EOTech HHS 2 Fog Proof Holosight is designed to allow an instinctive two-eye shooting operation and includes a 7mm riser. It can be used in harsh weather conditions over prolonged periods, thanks to its durable construction.
The OPMOD EOTech Sight uses a transversely mounted lithium 123 battery that offers an incredible battery life of approximately 600 hours. Its unique structure only requires 2 3/4 inches of rail space.
Specifications
- Magnification: 3 x
- Eye Relief: 2.2 inches
- Length: 8 inches
- Width: 3 inches
- Height: 3 inches
- Weight: 11.2 oz.
- Attachment/Mount Type: MIL-STD 1913, Weaver
- Reticle: 68 MOA Circle w/ 1-MOA Dot
- Battery Life: 1000 continuous hrs. at nominal setting 12 at room temp
Pros
- It has a 3x magnifier with a flip-to-side mount
- The reticle is a 68MOA circle with 1MOA aiming dot
- It uses a single transverse 123 battery to reduce sight length
- It has a long battery life
- The shortened base only requires at most 2 3/4 inches of rail space
- Battery cap and latch are replaced with a simple O-ring, tethered cap, for weatherproofing
- It has side buttons with a single quick detach-throw lever
Cons
- Water-resistant to only 10ft
4) EOTech OPMOD EXPS 3 Holographic Reflex Red Dot Sight
The EOTech OPMOD EXPS 3 Holographic Reflex Red Dot Sight is a non-magnifying, optical sight that projects a red dot reticle onto a lens to aid in the rapid acquisition of targets. It is designed for use on rifles and other long guns and is built to military specifications for durability and reliability.
The reflex sight features a compact design, allowing for easy use with both eyes open for quick target acquisition. The reticle is adjustable for brightness and can be used in both daylight and low-light conditions.
This product features side button controls for easy operation and offers waterproof, fog-proof performance in any tactical environment. The sight runs on a single CR123A battery with a long battery life. The EOTech OPMOD EXPS 3 is a high-quality option for shooters looking for a reliable, fast-acquisition sight.
Specifications
- Magnification: 1 x
- Eye Relief: Unlimited
- Length: 5 inches
- Width: 4 inches
- Height: 8 inches
- Weight: 11.2 oz.
- Attachment/Mount Type: MIL-STD 1913, Weaver
- Reticle: 68 MOA Ring and 1 MOA Dot
- Battery Life: 500-600 hours
Pros
- It uses a single transverse 123 battery to reduce sight length
- It has a shortened base that only requires at most 2 3/4 inches of rail space
- 30 brightness settings
- It has an O-ring, tethered cap for better sealing and weatherproofing
- The battery compartment is separated from the base to allow it to hover over the delta ring of the rifle
- Unlimited Eye Relief
- Side buttons, NV compatible with a single quick detach throw lever
- It is covered by EOTech’s Prestige Warranty
- Anti-Reflection coating on the external surface
Cons
- None
5) EOTech OPMOD HWS EXPS2 Holographic 1 MOA Green Dot Sight
The EOTech OPMOD HWS EXPS2 Holographic 1 MOA Green Dot Sight is a non-magnifying sight that projects a holographic red dot reticle onto a transparent lens. The 1 MOA refers to the size of the dot, which measures 1 Minute of Angle.
The sight is designed for quick target acquisition and is often used in close-quarters combat, hunting, and competitive shooting. This OPMOD version is a limited edition version that features a matte black finish and a quick-detach lever for easy mounting and dismounting.
The EXPS2 sight features a side button for easy control of the reticle brightness and is compatible with night vision devices.
Specifications
- Magnification: 1 x
- Eye Relief: Unlimited
- Length: 8 inches
- Width: 3 inches
- Height: 9 inches
- Weight: 11.2 oz.
- Attachment/Mount Type: Picatinny
- Reticle: Green 68 MOA Ring w/ Single 1 MOA Dot
- Battery Life: 600 continuous hrs. at nominal setting 12 at room temp
Pros
- The green reticle is approximately 6x easier to see than red
- It allows for co-witnessing of iron sights
- It has convenient side buttons to add a magnifier
- It features an adjustable, locking, quick-detach lever
Cons
- Fixed magnification
6) EOTech OPMOD Transverse EXPS2-2 Holographic Weapon Sight
The EOTech OPMOD Transverse EXPS2-2 Holographic Weapon Sight projects a holographic reticle onto a transparent lens, allowing the user to quickly and accurately acquire targets. It comes with an adjustable, locking, quick detach lever for easy attachment and removal.
The sight features a transverse mount that allows the sight to be mounted on a rifle at a 45-degree angle, making it easy to use in close-quarters combat scenarios. It also has a low-profile design and is powered by a single CR123A battery, which provides up to 600 hours of continuous use.
The sight is also submersible up to 10 feet and has an adjustable, side-button operation for easy adjustments.
Specifications
- Magnification: 1 x
- Eye Relief: Unlimited
- Length: 8 inches
- Width: 3 inches
- Height: 9 inches
- Weight: 11.2 oz.
- Attachment/Mount Type: Weaver, MIL-STD 1913
- Reticle: 68 MOA Ring w/ 2 MOA Dot
- Battery Life: 1000 hours
- Field of View, Linear: 30 yds at 4 in
Pros
- The reticle is a 68MOA circle with 1 MOA aiming dot or 68MOA circle with two 1 MOA aiming dots
- It uses a single transverse 123 battery to reduce sight length
- It has a shortened base that only requires at most 2 3/4 inches of rail space
- The battery cap and latch are replaced with a simple O-ring, tethered cap for better sealing
- The battery compartment is separated from the base to allow it to hover over the delta ring of the rifle
- Higher battery life
- The side buttons come with a single quick detach-throw lever
Cons
- It has a fixed magnification
Related : 7 Best ATN OPMOD Scopes
What is an Opmod sight?
An Opmod sight is a type of aftermarket accessory for firearms that enhances the capabilities of the weapon’s existing sights or optics. These sights can include features such as red dot sights, holographic sights, and magnifiers.
Opmod sights are designed to improve the accuracy and speed of target acquisition for the shooter. They are typically mounted on the top rail of a rifle or the slide of a handgun and can be easily installed or removed as needed.
What is so special about EOTech?
Field Of View
The HWS’s (Holographic Weapon Sights) wide rectangular window heightens peripheral vision. This encourages shooters to keep both eyes open for increased speed-to-target acquisition and enhanced situational awareness thanks to the enlarged field of view.
Unwavering Focus
With EOTech, both reticle and target maintain a constant, razor-sharp focus. The holographic reticle is perceived by the shooter to be, allowing the shooter to focus on both the target and the reticle at the same time.
Camouflage
The HWS’s non-reflective sight window and holographic reticle are visible only to the operator. Engineered for day or night combat missions, the products have no mirrored or metal-coated surfaces to give away your position.
Night Vision
Night-vision-compatible technology provides a radically enhanced sighting system over traditional reflex sights with ultimate clarity even in complete darkness. Most HWSs are equipped with night vision-compatible technology to allow operators to use a night vision device in conjunction with their HWS.
Versatile Reticles
Its large ring with a precise aiming dot promotes faster target acquisition than a single dot, especially under pressure. EOTECH offers many types of reticle patterns as opposed to only a single dot.
Some designs are fabricated to incorporate multiple trajectory points of aim and range assist features. This variety in reticle patterns is ideal for a variety of firearm applications.
Difference between Eotech OPMOD and original Eotech
The main difference is the additional features and accessories that come with the OPMOD (Operator Modified) version. The EOTech OPMOD holographic sight is a special edition version of the sight that features a few enhancements and customizations over the original version.
However, the original EOTech holographic sight is still a very high-quality, durable, and reliable sight that is widely used by military and law enforcement personnel, as well as by civilian shooters.
You May Also Like:Vortex OPMOD Scopes, Red dots, Binoculars
EOTech OPMOD FAQs
- What are Opmod sights?
OPMOD sights are water-resistant sights that are designed with improved technology to offer distinct features such as instinctive two-eyes-open shooting with a transversely mounted 123 battery, and a 7mm raised base offering a lower 1/3 co-witness with iron sights.
- What is the difference between EOTech Exps 2 and 3?
The only major difference is that the EXPS3 has night vision capability and additional water protection with an increase in its submersible rating.
- What is the difference between XPS and EXPS?
The main difference is simply the height at which both of them sit once you add them to a rifle. The EXPS has a built-in QD attachment system lever which puts the entire height of the optic at a lower-third height making it stand lower than the XPS.
Conclusion
EOTech OPMOD sights are made with the exact need of the users in mind. They have advanced features compared to ordinary EOTech sights, making them the best choice for anyone looking for value for money.
The ones discussed are the best in the market and we hope that they suit your need.